BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//WTTAP - ECPv6.17.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://wttap.com
X-WR-CALDESC:Events for WTTAP
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Los_Angeles
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20250309T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20251102T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20260308T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20261101T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20270314T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20271107T090000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260806T110000
DTEND;TZID=America/Los_Angeles:20260806T120000
DTSTAMP:20260729T151804Z
CREATED:20260729T151804Z
LAST-MODIFIED:20260729T151804Z
UID:5216-1786014000-1786017600@wttap.com
SUMMARY:Safe Routes Partnership: Making Strides 2026: A Look at Our State Report Cards on Walking\, Biking\, and Active Communities (Virtual)
DESCRIPTION:Webinar: Making Strides 2026: A Look at Our State Report Cards on Walking\, Biking\, and Active Communities\nDate: August 6\, 2026\nTime: 11:00 am to 12:00 pm PT\nCost: Free \nContinuing Education Credits: Unknown\nOrganization: Safe Routes Partnership \nJoin Safe Routes Partnership to learn about the sixth edition of Safe Routes Partnership’s state report cards and report\, Making Strides: 2026 State Report Cards on Support for Walking\, Bicycling\, and Active Kids and Communities. \nThis report marks a decade of work reviewing and scoring best practices in policy\, funding and practices that support walking\, biking\, and active communities. Safe Routes Partnership is excited to share the milestones and case studies that mark real progress during that time. During this webinar they will walk you through the scoring and indicators\, the changes they have seen since their last state report cards in 2024\, and how you can use this information to make change (whether you are on staff at a DOT or an advocate).
URL:https://wttap.com/event/safe-routes-partnership-making-strides-2026-a-look-at-our-state-report-cards-on-walking-biking-and-active-communities-virtual/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260811T070000
DTEND;TZID=America/Los_Angeles:20260811T083000
DTSTAMP:20260611T190737Z
CREATED:20260611T190652Z
LAST-MODIFIED:20260611T190737Z
UID:4909-1786431600-1786437000@wttap.com
SUMMARY:WV LTAP: Presenting 101 Webinar: The Art of Effective Face-to-Face & Virtual Presentations (Virtual)
DESCRIPTION:August 11\, 2026\n7:00 AM – 8:30 AM PT \nCreating and delivering presentations is a necessary skill for many in public works\, whether presenting to elected officials\, residents\, or colleagues. This 90-minute session will provide attendees with general best practices to improve presentation and communication skills. \nClick here to register.
URL:https://wttap.com/event/wv-ltap-presenting-101-webinar-the-art-of-effective-face-to-face-virtual-presentations/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260815T080000
DTEND;TZID=America/Los_Angeles:20260816T150000
DTSTAMP:20260616T150533Z
CREATED:20260611T194326Z
LAST-MODIFIED:20260616T150533Z
UID:4915-1786780800-1786892400@wttap.com
SUMMARY:WTTAP: OSHA 10 for Construction (Session 1)
DESCRIPTION:Course Summary: \nOSHA 10 Training for Construction ensures you understand how to navigate common job-site hazards so that you feel safe at work. Primarily\, this involves spotting\, avoiding\, and reporting safety and health risks encountered on a daily basis. \nThe training includes best practices on how to prevent slipping\, tripping\, getting struck by an object\, electrocution\, and getting caught in between objects or machinery. Additionally\, the training helps increase your knowledge about construction-specific safety measures under OSHA 29 CFR 1926. \nYou will also understand your employer’s responsibility for workplace safety\, as well as the rights OSHA gives you as a worker and how to file a complaint if the workplace isn’t living up to its safety obligations. \nPrerequisites: \nNone. \nInstructor: \nScott Alquist has over 39 years professional safety work specializing in construction safety\, general industry safety and hazardous materials. Scott has completed the National Highway Institute “Train the Trainer” program and is an Occupational Safety and Health Administration authorized instructor. He is the former Program Manager for Truckee Meadows Community College’s Safety Center.
URL:https://wttap.com/event/wttap-osha-10-for-construction-2/
CATEGORIES:OSHA 10,Safety
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260817T080000
DTEND;TZID=America/Los_Angeles:20260818T150000
DTSTAMP:20260616T150741Z
CREATED:20260611T194236Z
LAST-MODIFIED:20260616T150741Z
UID:4913-1786953600-1787065200@wttap.com
SUMMARY:WTTAP: OSHA 10 for Construction (Session 2)
DESCRIPTION:Course Summary: \nOSHA 10 Training for Construction ensures you understand how to navigate common job-site hazards so that you feel safe at work. Primarily\, this involves spotting\, avoiding\, and reporting safety and health risks encountered on a daily basis. \nThe training includes best practices on how to prevent slipping\, tripping\, getting struck by an object\, electrocution\, and getting caught in between objects or machinery. Additionally\, the training helps increase your knowledge about construction-specific safety measures under OSHA 29 CFR 1926. \nYou will also understand your employer’s responsibility for workplace safety\, as well as the rights OSHA gives you as a worker and how to file a complaint if the workplace isn’t living up to its safety obligations. \nPrerequisites: \nNone. \nInstructor: \nScott Alquist has over 39 years professional safety work specializing in construction safety\, general industry safety and hazardous materials. Scott has completed the National Highway Institute “Train the Trainer” program and is an Occupational Safety and Health Administration authorized instructor. He is the former Program Manager for Truckee Meadows Community College’s Safety Center.
URL:https://wttap.com/event/wttap-osha-10-for-construction/
CATEGORIES:OSHA 10,Safety
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260818T080000
DTEND;TZID=America/Los_Angeles:20260819T163000
DTSTAMP:20260219T170623Z
CREATED:20260219T164956Z
LAST-MODIFIED:20260219T170623Z
UID:4307-1787040000-1787157000@wttap.com
SUMMARY:Western TTAP/National RTP Tribal Transit Workshop (Los Angeles\, CA)
DESCRIPTION:Western TTAP and National RTAP are proud to partner to provide tribes with our 2-day Tribal Transit Workshop. \nThis training is designed using the framework established by the National RTAP Transit Manager’s Toolkit\, an online resource designed to help new rural transit managers operate efficiently and comply with Federal FTA Section 5311 regulations. This training covers Administration\, Operations and Planning\, Compliance\, and Tribal Transit\, with references to key Federal circulars. Regularly updated\, the Toolkit provides current guidance and allows users to suggest new topics for practical\, day-to-day management support. \nThe workshop is designed for new rural and tribal transit managers who need a practical reference for day-to-day operations and FTA Section 5311 compliance. It provides essential guidance to help transit organizations run smoothly and meet Federal requirements. \nBy the end of the training\, participants will be able to: \n\nUnderstand the core responsibilities of rural and tribal transit managers.\nNavigate Federal regulations and ensure compliance with FTA Section 5311 requirements.\nApply best practices in administrations\, operations\, and planning for transit management.\nIdentify and utilize Federal circulars and guidance relevant to transit management.\nAccess and leverage Toolkit resources to address day-to-day management challenges.\n\n\nLocation: \nCalifornia Department of Transportation\nCaltrans District 7\n100 Main Street\nRoom 1.040A\nLos Angeles\, CA 90012 \nCost: \nThe cost for this workshop is $150 per person. \nHotel Accomodations: \nA block of rooms have been reserved at: \nDoubleTree by Hilton Los Angeles Downtown\n120 S Los Angeles St.\nLos Angeles\, CA 90012 \nPlease note: you must book your hotel room by July 20 to receive the group rate. \nThere are separate charges for parking\, as follows: \n\nOvernight Self-Parking: $39 + tax per car\, per day\nOvernight Valet Parking: $48 + tax per car\, per day
URL:https://wttap.com/event/western-ttap-national-rtp-tribal-transit-workshop-los-angeles-ca/
LOCATION:California Department of Transportation\, 100 Main Street\, Los Angeles\, CA\, 90012\, United States
CATEGORIES:Conference,Conferences and Summits,Transportation Planning,Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260818T100000
DTEND;TZID=America/Los_Angeles:20260818T120000
DTSTAMP:20260729T153212Z
CREATED:20260729T153212Z
LAST-MODIFIED:20260729T153212Z
UID:5220-1787047200-1787054400@wttap.com
SUMMARY:National Center for Rural Road Safety: Road Safety Champion Program (RSCP): Introduction to Road Safety (CM#1) (Virtual)
DESCRIPTION:Webinar: Road Safety Champion Program (RSCP): Introduction to Road Safety (CM#1)\nDate: August 18\, 2026\nTime: 10:00 am to 12:00 pm PT\nCost: Free\nContinuing Education Credits: 0.2 CEUs\nOrganization: National Center for Rural Road Safety   \nGet an overview of safety trends and a national understanding of roadway safety. Also\, discuss techniques for safety collaboration\, the importance of prioritizing safety over other considerations\, and how an individual can become a Road Safety Champion.
URL:https://wttap.com/event/national-center-for-rural-road-safety-road-safety-champion-program-rscp-introduction-to-road-safety-cm1-virtual/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260824T080000
DTEND;TZID=America/Los_Angeles:20260827T170000
DTSTAMP:20260623T173215Z
CREATED:20260623T172936Z
LAST-MODIFIED:20260623T173215Z
UID:4937-1787558400-1787850000@wttap.com
SUMMARY:WTTAP Heavy Equipment Operations and Safety Training
DESCRIPTION:Please note: you must attend the entire training to receive a certificate of completion. \nCourse Summary:\nThis comprehensive\, hands-on training course provides participants with essential knowledge and practical skills for safely operating and working around dump trucks\, forklifts\, motor graders\, and skid steers. The course covers equipment orientation\, work zone setup (both internal and external)\, and critical safety practices for operators and pedestrian workers. Participants will also learn key principles of vehicle operation\, load securement\, inspection procedures\, and the use of pre-trip and pre-job checklists to ensure safe and efficient operations. \nThrough a combination of classroom instruction and hands-on activities\, attendees will gain experience in safe equipment operation\, including traveling with loads\, working on inclines\, managing high-level stowage\, and navigating various job site conditions such as loading docks and temporary traffic control zones. Emphasis is placed on hazard awareness\, proper equipment use\, and best practices for maintaining safe\, productive work environments across a variety of construction and transportation settings. \nLearning Objectives:\nBy the end of this training\, participants will be able to: \n\nList the 12 absolute rules operators must obey.\nUse checklists to ensure equipment is operating safely.\nUse site safety practices and recognize warning signs.\nIdentify various pieces of heavy equipment by the features of each piece of equipment.\nEliminate bad driving habits while operating heavy equipment.\nUnderstand the placement and use of cones\, barricades\, caution tape and other barriers.\nAssess proper direction of travel based on the load\, acceptable approach angles\, travel within delineated lines\, and the correct use of spotters.\n\nPrerequisites:\nNone. \nTarget Audience:\nThis course is designed for tribal DOT\, municipal public works\, parks\, streets/roads\, water\, wastewater\, distribution/collection and/or storm water utility workers or any other tribal entity employees who may be called on to operate the equipment featured in this course. \nThis training is also recommended for emergency alternate personnel who may be called on to use the equipment in special circumstances\, such as after a natural disaster or any other reason where no other operators are available. Other recommended participants are crew leaders\, division supervisors\, agency safety officers\, department safety coordinators\, general safety trainers and/or fleet team members. \nAgenda/Topics:\nBackhoes \n\nAccident Case Studies\nEquipment Orientation\nExternal Work Zone Set-up (Temporary Traffic Control)\nInternal Work Zone Set-up (Perimeters and Barriers)\nExcavating Issues\nSafe Mounting\, Seatbelts\, No-Rider Rules and Prohibited Uses\nImperative Operator Safety Rules\nImperative Essential Pedestrian Worker Rules\nImperative Non-Essential Pedestrian Worker Rules\nSpecial Operation Tasks\nPreparing for an Unattended Work Zone\nEquipment Inspection and Use of Pre-Job Briefing Checklists\n\nForklifts: \n\nForklift Safety and Your Facilities\nPreferred Forklift Designs and Important Features & Accessories\nSafe Forklift Operations\nTraveling with Loads\nHigh Level Stowage\nInclines and Ramps\nLoading Docks/Truck/Trailers/Railcars\nSpecial Hazard Areas/Unusual Circumstances\nFueling & Charging\nMultiple Hands-On Operations Activities\n\nTractor Loaders: \n\nTrailering and Load Securement Hazards (Accidents Scenarios)\nMatching Vehicle Size with Trailer Size\nHitch Types\, Proper Operation and Locking Mechanisms\nSafety Chains\, Lights and Trailer Brakes (Air Lines and Wires)\nChoosing Loading Locations and Vehicle Prep\nDrive-on Loading/Unloading Mobile Equipment on Trailers\nGeneral Load Securement Principles\nSecuring Mobile Equipment on Trailers\nSecuring Other Loads on Trucks or Trailers (Binders/Protectors)\nUse of Fork Lifts\, Cranes or Other Machines to Load Vehicles\nSecuring Tarps\, Tools and Miscellaneous Cargo\nSafely Driving Vehicles with Trailers\n\nSkid Steers: \n\nEquipment Orientation\nExternal & Internal Work Zone Set-Up\nExcavating Issues\nSafe Mounting\, Seatbelts\, No-Rider Rules and Prohibited Uses\nImperative Operator Safety Rules\nImperative Essential Pedestrian Worker Rules\nImperative Non-Essential Pedestrian Worker Rules\nSpecial Skid Steer Operation Tasks\nPreparing for an Unattended Work Zone\nEquipment Inspection and Use of Pre-Job Briefing Checklists\nMultiple Hands-On Operations Activities
URL:https://wttap.com/event/wttap-heavy-equipment-operations-and-safety-training/
LOCATION:101 Paloverde Dr\, Lake Havasu\, 101 Paloverde Dr.\, Lake Havasu\, CA\, 92363\, United States
CATEGORIES:Safety
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260824T083000
DTEND;TZID=America/Los_Angeles:20260824T123000
DTSTAMP:20260729T130700Z
CREATED:20260729T130700Z
LAST-MODIFIED:20260729T130700Z
UID:5133-1787560200-1787574600@wttap.com
SUMMARY:Utah LTAP: Flagger Certification
DESCRIPTION:Trainer: Ed Rufener \nThis course is from American Traffic Safety Services Association (ATSSA) and is recognized by the Utah Department of Transportation (UDOT) in fulfilling their requirements for various levels of traffic control training for local agencies. \nThis state-specific flagger training is recommended for roadway workers\, contractors\, law enforcement and supervisors. This is a basic course that prepares each worker to handle the responsibilities associated with Utah highway flagger responsibilities as outlined in Part 6 of the MUTCD. \nIn the course\, each worker will be required to pass a short exam and demonstrate their understanding of the rules covering a flagger through a mockup of a traffic control situation. \nAn ATSSA Certification card will be issued to those who pass the exam. As a certified flagger you are certified to help control the movement of motor vehicles through an active work zone\, but not to set up any traffic control. This certification is valid for three (3) years and must be renewed at a training every three years. Must be l8 years of age or older. \nTaylorsville USU Campus – 920 W Levoy Drive – Taylorsville \n8:30 am – 12:30 pm    \nRoom 142
URL:https://wttap.com/event/utah-ltap-flagger-certification/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260825T083000
DTEND;TZID=America/Los_Angeles:20260825T170000
DTSTAMP:20260729T130844Z
CREATED:20260729T130844Z
LAST-MODIFIED:20260729T130844Z
UID:5135-1787646600-1787677200@wttap.com
SUMMARY:Utah LTAP: TCT - Traffic Control Technician
DESCRIPTION:Trainer: Ed Rufener \nThe Traffic Control technician course is offered as an introduction to the basic principles of temporary work zone traffic control.  This training course is designed to instruct the participants in the underlying principles of temporary traffic control as set forth in the MUTCD. \nIn this course students will be provided with practical knowledge\, techniques\, and instruction on the installation and maintenance of traffic control devices to enable them to apply practical concepts.  This course is recommended for all workers who may be required to handle temporary traffic control devices; and is accepted by UDOT. \nWorkers are required to complete and pass a written examination. Training is good for 4 years. Certificates are no longer sent by ATSSA.  You can get a copy of your certificate from your LTAP account. \nAs a traffic control technician you are meeting the UDOT requirement to maintain and set up traffic control in an active work zone. UDOT requires that you pass the TCT State Specific course with a score of 80%\, have one year (2000 hours) of temporary traffic control experience. This training is valid for four (4) years\, at the end of the four year period you are required to take the course again.  This course teaches you how to correctly place temporary traffic control devices in an active work zone. This course does not certify you to be a flagger. This course is a prerequisite to becoming a Traffic Control Supervisor (TCS). \nThe APWA and UDOT specifications as outlined in Traffic Control 01554 Section 1.9 requires that the Traffic Control Technician be certified by the Department or by the American Traffic Safety Services Association (ATSSA) as a Traffic Control Technician (TCT). Each crew should have at least one member certified as a Traffic Control Technician.  The MUTCD Section 6D.03 states workers having specific TTC responsibilities should be trained in TTC techniques\, device usage\, and placement. \nTaylorsville USU Distance Learning Campus – \n920 W Levoy Dr. – Taylorsville \nTime – 8:30 – 5:00    \nRoom 157    
URL:https://wttap.com/event/utah-ltap-tct-traffic-control-technician/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260825T100000
DTEND;TZID=America/Los_Angeles:20260825T110000
DTSTAMP:20260729T153324Z
CREATED:20260729T153324Z
LAST-MODIFIED:20260729T153324Z
UID:5222-1787652000-1787655600@wttap.com
SUMMARY:National Safety Council (NSC): Frontiers of Technology: Automated Enforcement for Distracted Driving (Virtual)
DESCRIPTION:Webinar: Frontiers of Technology: Automated Enforcement for Distracted Driving\nDate: August 25\, 2026\nTime: 10:00 am to 11:00 am PT\nCost: Free\nContinuing Education Credits: Unknown\nOrganization: National Safety Council (NSC)    \nDistracted driving takes the lives of thousands each year. Despite ample information about the dangers of using a mobile phone while driving\, this behavior has proven difficult to effectively change. In this webinar\, learn from the leaders of a program in Minnesota that is exploring the potential for automated enforcement of driving while distracted by mobile phones so that this dangerous behavior can be consistently deterred.
URL:https://wttap.com/event/national-safety-council-nsc-frontiers-of-technology-automated-enforcement-for-distracted-driving-virtual/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260825T100000
DTEND;TZID=America/Los_Angeles:20260825T120000
DTSTAMP:20260729T153511Z
CREATED:20260729T153511Z
LAST-MODIFIED:20260729T153511Z
UID:5224-1787652000-1787659200@wttap.com
SUMMARY:National Center for Rural Road Safety: Road Safety Champion Program (RSCP): Understanding Human Factors (CM#2) (Virtual)
DESCRIPTION:Webinar: Road Safety Champion Program (RSCP): Understanding Human Factors (CM#2)\nDate: August 25\, 2026\nTime: 10:00 am to 12:00 pm PT\nCost: Free\nContinuing Education Credits: 0.2 CEUs\nOrganization: National Center for Rural Road Safety   \nThis course will equip human factors “non”-experts to better consider the capabilities and limitation of road users and incorporate them into policies and practices. Knowing how road users interact with their vehicle\, the roadway\, and other road users can also provide useful insights for decision making for construction and maintenance personnel\, planners\, engineers\, public health professionals\, and law enforcement.
URL:https://wttap.com/event/national-center-for-rural-road-safety-road-safety-champion-program-rscp-understanding-human-factors-cm2-virtual/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260827T130000
DTEND;TZID=America/Los_Angeles:20260827T153000
DTSTAMP:20260417T141458Z
CREATED:20260417T141425Z
LAST-MODIFIED:20260417T141458Z
UID:4693-1787835600-1787844600@wttap.com
SUMMARY:Western TTAP: Pothole Patching and Repair (Virtual)
DESCRIPTION:Using proper patching and repair techniques can improve structural integrity and restore rideability for pavements experiencing local failures. This 2-hour training compares partial- and full-depth repair techniques along with materials used to implement them. \nLearning Objectives: \nAfter attending training\, you will be able to: \n\nExplain the purpose of pothole patching and repair\nDescribe pavement conditions that indicate a partial-depth patching (PDP) is appropriate\nDescribe pavement conditions that indicate a full-depth patching (FDP) is appropriate\nSelect appropriate projects for PDP and FDP\nIdentify best practices for properly completing repairs and key inspection factors when monitoring an FDP\n\nPrerequisites: \nPlease complete the following brief self-paced training prior to attending: Asphalt Partial-Depth and Full-Depth Patching. \nTarget Audience: \nThis training is intended for personnel who select or apply patching materials in potholes or localized structural failures\, as well as personnel who may specify or inspect the work. \nInstructor: \nGreg Duncan\, P.E.\, is a Senior Engineer at Applied Pavement Technology\, Inc.\, with more than 30 years of pavement materials\, construction\, and roadway maintenance engineering experience. He is a certified National Highway Institute (NHI) instructor and regularly teaches NHI’s “Maintenance Leadership Academy” and “Constructing and Inspecting Asphalt Paving Projects” courses. Greg regularly works on national and state projects dealing with preventive maintenance treatments.
URL:https://wttap.com/event/western-ttap-pothole-patching-and-repair-virtual-2/
LOCATION:Virtual
CATEGORIES:Infrastructure Management,Pothole Patching and Repair
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260830T080000
DTEND;TZID=America/Los_Angeles:20260902T170000
DTSTAMP:20260429T181307Z
CREATED:20260429T181307Z
LAST-MODIFIED:20260429T181307Z
UID:4742-1788076800-1788368400@wttap.com
SUMMARY:Public Works Expo (PWX)
DESCRIPTION:PWX provides a first-class multi-modal learning experience designed for professionals at all levels and across the entire spectrum of public works. Come prepared to see\, hear\, touch\, and discuss in a variety of traditional and interactive sessions\, seminars\, workshops\, and networking opportunities. \nAttendees can also spend time on North America’s largest exhibit floor for public works equipment and services—we’ve carved out generous portions of noncompete time\, so you don’t miss any sessions. Kick tires\, talk about technology\, or get the scoop on new products.
URL:https://wttap.com/event/public-works-expo-pwx/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260831T083000
DTEND;TZID=America/Los_Angeles:20260901T170000
DTSTAMP:20260729T131049Z
CREATED:20260729T131049Z
LAST-MODIFIED:20260729T131049Z
UID:5137-1788165000-1788282000@wttap.com
SUMMARY:Utah LTAP: TCS - Traffic Control Supervisor
DESCRIPTION:Trainer:  Ed Rufener \nThe Traffic Control Supervisor course is a two-day advanced training course geared to the specific job-related duties of the traffic control supervisor. Critical knowledge is passed on by experienced instructors who combine multimedia and group activities to solve real problems. Upon completion of the course and passing a written examination\, participants are mailed a certificate of completion from ATSSA. \nThis course teaches you how to read and interpret a traffic control plan in the field. It also teaches you how to supervise and oversee people in the field. Upon completion of the TCS State Specific course you will have the oversight of setting up traffic control devices in the field and having people assist in the setup. This course does not certify you as a Flagger. If you so choose you can pay an additional fee and apply to become a Certified Traffic Control Supervisor through ATSSA (for other States that accept ATSSA). \nPlease note:  Certification requirements include passing approved TCT and TCS courses (80%)\, having 2 years of temporary traffic control experience at a supervisory level or in responsible charge and providing 2 professional references to verify work experience. Recertification shall be maintained at a minimum interval of 4 years. \nTaylorsville USU Distance Learning Campus – 920 W Levoy Dr. – Taylorsville \nTime – 8:30 – 5:00 \nRoom 156
URL:https://wttap.com/event/utah-ltap-tcs-traffic-control-supervisor/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260908T083000
DTEND;TZID=America/Los_Angeles:20260908T123000
DTSTAMP:20260729T131342Z
CREATED:20260729T131342Z
LAST-MODIFIED:20260729T131342Z
UID:5139-1788856200-1788870600@wttap.com
SUMMARY:Utah LTAP: Basics of a Good Road
DESCRIPTION:Teachers: Randy Wahlen\, Michael Hales – Utah LTAP \nAll roads need the application of basic principles of road design\, construction\, and maintenance to preserve and increase the life of the road. This workshop will give the attendees an understanding of what goes into the construction and maintenance of a good road. There are certain common essentials to any good road\, whether asphalt or gravel-surfaced.  Knowing these general concepts will  also help improve maintenance plans to get the most out of a road budget. \nTaylorsville USU Campus – 920 W Levoy Drive – Taylorsville \n8:30 am – 12:30 pm \nRoom 156
URL:https://wttap.com/event/utah-ltap-basics-of-a-good-road/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260917T083000
DTEND;TZID=America/Los_Angeles:20260917T123000
DTSTAMP:20260729T133051Z
CREATED:20260729T133051Z
LAST-MODIFIED:20260729T133051Z
UID:5161-1789633800-1789648200@wttap.com
SUMMARY:Utah LTAP: Heavy Equipment Safety - Prerequisite for Heavy Equipment Hands On
DESCRIPTION:Trainers: Dave Johnson\, Spence Felsted\, Randy Wahlen\, Michael Hales \nThis class is a Road Scholar (Level 1) requirement. \nThis half-day classroom training covers: trenching safety\, vehicle safety\, vehicle maintenance\, daily walk-around inspections\, and pre- and post-shift inspection. This is a mandatory pre-requisite for the Heavy Equipment Operation Hands-On course and is good for 3 years. \nTaylorsville USU Distance Learning Campus – 920 W Levoy Dr. – Taylorsville \nTime – 8:30 – 12:30   \nRoom 157
URL:https://wttap.com/event/utah-ltap-heavy-equipment-safety-prerequisite-for-heavy-equipment-hands-on/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260918T080000
DTEND;TZID=America/Los_Angeles:20260918T120000
DTSTAMP:20260528T135002Z
CREATED:20260528T134854Z
LAST-MODIFIED:20260528T135002Z
UID:4849-1789718400-1789732800@wttap.com
SUMMARY:Western TTAP: ATSSA Flagger Training (AM Session)
DESCRIPTION:Course Overview: \nThis workshop will cover why proper flagger operations are important\, the skillset of a good flagger\, standard flagger control references\, and best practices for various situations. \nThis interactive workshop is taught through a combination of lecture\, video\, and group activities. \nLearning Objectives: \n\nDescribe why practicing safe\, standards-based flagging operations is important.\nList the component parts and associate elements of standard flagging setups.\nRecognize key elements of proper flagging signals and procedures.\nRecall factors used for determining proper flagger station positioning.\nDescribe basic flagging techniques using one or more flaggers under various scenarios.\nList effective flagger communication techniques for use between flaggers\, with motorists\, and work other workers.\nDescribe nighttime considerations\, setup and removal\, and use of flagging technology.\n\nAudience: \nThis course is intended for anyone interested in becoming a certified road flagger. ATSSA is a recognized flagger certification in the state of Nevada and valid for all NDOT projects. \nParticipants DO NOT need to employed by a public agency or a unionized company to take this course. \nNOTE: ATSSA Certification cards are good for 4-years & participants MUST be 18 years of age to participate. Upon enrollment\, a copy of the participant’s valid driver’s license or state ID will be required.
URL:https://wttap.com/event/western-ttap-atssa-flagger-training-am-session-3/
LOCATION:Blue Lake Rancheria\, 1 Aiyekee Loop\, Blue Lake\, CA\, 95525\, United States
CATEGORIES:ATSSA Flagger Certification,Safety,Traffic Control
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260918T130000
DTEND;TZID=America/Los_Angeles:20260918T170000
DTSTAMP:20260528T134944Z
CREATED:20260528T134944Z
LAST-MODIFIED:20260528T134944Z
UID:4851-1789736400-1789750800@wttap.com
SUMMARY:Western TTAP: ATSSA Flagger Training (PM Session)
DESCRIPTION:Course Overview: \nThis workshop will cover why proper flagger operations are important\, the skillset of a good flagger\, standard flagger control references\, and best practices for various situations. \nThis interactive workshop is taught through a combination of lecture\, video\, and group activities. \nLearning Objectives: \n\nDescribe why practicing safe\, standards-based flagging operations is important.\nList the component parts and associate elements of standard flagging setups.\nRecognize key elements of proper flagging signals and procedures.\nRecall factors used for determining proper flagger station positioning.\nDescribe basic flagging techniques using one or more flaggers under various scenarios.\nList effective flagger communication techniques for use between flaggers\, with motorists\, and work other workers.\nDescribe nighttime considerations\, setup and removal\, and use of flagging technology.\n\nAudience: \nThis course is intended for anyone interested in becoming a certified road flagger. ATSSA is a recognized flagger certification in the state of Nevada and valid for all NDOT projects. \nParticipants DO NOT need to employed by a public agency or a unionized company to take this course. \nNOTE: ATSSA Certification cards are good for 4-years & participants MUST be 18 years of age to participate. Upon enrollment\, a copy of the participant’s valid driver’s license or state ID will be required.
URL:https://wttap.com/event/western-ttap-atssa-flagger-training-pm-session-3/
LOCATION:Blue Lake Rancheria\, 1 Aiyekee Loop\, Blue Lake\, CA\, 95525\, United States
CATEGORIES:ATSSA Flagger Certification,Safety,Traffic Control
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260921T080000
DTEND;TZID=America/Los_Angeles:20260922T170000
DTSTAMP:20260729T133706Z
CREATED:20260729T133706Z
LAST-MODIFIED:20260729T133706Z
UID:5165-1789977600-1790096400@wttap.com
SUMMARY:Utah LTAP: Heavy Equipment Hands On - 2 Day Course - BACKHOE - Level 1- Session 1
DESCRIPTION:Trainer – Dave Johnson \nNOTE: Students must have successfully completed the Heavy Equipment Safety Course within the last 3 years to take the Hands-On training. \nThis two-day hands-on training covers: vehicle safety\, vehicle maintenance\, daily walk-around inspections\, pre- and post-shift inspections and equipment operating techniques. \nEquipment.  This piece of equipment is the Backhoe – Level 1 or Level 2\nSeat time hours are required between Level 1 & 2\, or under discretion of instructor. \nSantaquin Pit  \n8:00 – 5:00 pm \nGoogle Map URL: https://goo.gl/maps/TPmReJkEe6NiMiBQA \nDirections: \n\nExit 248 Payson ( W 800 S) Turn Right\nGo to Next Cross Street/Frontage Road\nTurn Left takes you to 12000 S\nTurn Right on 12000 S from 11950 S\nHead West across the intersection of 12000 S and Mountain Road and immediately turn right before the Keigley Quarry sign.
URL:https://wttap.com/event/utah-ltap-heavy-equipment-hands-on-2-day-course-backhoe-level-1-session-1/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260921T080000
DTEND;TZID=America/Los_Angeles:20260922T170000
DTSTAMP:20260729T134114Z
CREATED:20260729T134114Z
LAST-MODIFIED:20260729T134114Z
UID:5173-1789977600-1790096400@wttap.com
SUMMARY:Utah LTAP: Heavy Equipment Hands On - 2 Day Course - MINI EX - Level 1 - Session 1
DESCRIPTION:Trainer – Dave Johnson \nNOTE: Students must have successfully completed the Heavy Equipment Safety Course within the last 3 years to take the Hands-On training. \nThis two-day hands-on training covers: vehicle safety\, vehicle maintenance\, daily walk-around inspections\, pre- and post-shift inspections and equipment operating techniques. \nEquipment.  This piece of equipment is the Mini Ex – Level 1 or Level 2 \nSeat time hours are required between Level 1 & 2\, or under discretion of instructor. \nSantaquin Pit  \n8:00 – 5:00 pm \nGoogle Map URL: https://goo.gl/maps/TPmReJkEe6NiMiBQA \nDirections: \n\nExit 248 Payson ( W 800 S) Turn Right\nGo to Next Cross Street/Frontage Road\nTurn Left takes you to 12000 S\nTurn Right on 12000 S from 11950 S\nHead West across the intersection of 12000 S and Mountain Road and immediately turn right before the Keigley Quarry sign.
URL:https://wttap.com/event/utah-ltap-heavy-equipment-hands-on-2-day-course-mini-ex-level-1-session-1/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260921T080000
DTEND;TZID=America/Los_Angeles:20260922T170000
DTSTAMP:20260729T134459Z
CREATED:20260729T134459Z
LAST-MODIFIED:20260729T134459Z
UID:5181-1789977600-1790096400@wttap.com
SUMMARY:Utah LTAP: Heavy Equipment Hands On - 2 Day Course - FRONT END LOADER - Level 1 - Session 1
DESCRIPTION:Trainer – Dave Johnson \nNOTE: Students must have successfully completed the Heavy Equipment Safety Course within the last 3 years to take the Hands-On training. \nThis two-day hands-on training covers: vehicle safety\, vehicle maintenance\, daily walk-around inspections\, pre- and post-shift inspections and equipment operating techniques. \nEquipment.  This piece of equipment is the Front End Loader – Level 1 or Level 2 \nSeat time hours are required between Level 1 & 2\, or under discretion of instructor. \nSantaquin Pit  \n8:00 – 5:00 pm \nGoogle Map URL: https://goo.gl/maps/TPmReJkEe6NiMiBQA \nDirections: \n\nExit 248 Payson ( W 800 S) Turn Right\nGo to Next Cross Street/Frontage Road\nTurn Left takes you to 12000 S\nTurn Right on 12000 S from 11950 S\nHead West across the intersection of 12000 S and Mountain Road and immediately turn right before the Keigley Quarry sign.
URL:https://wttap.com/event/utah-ltap-heavy-equipment-hands-on-2-day-course-front-end-loader-level-1-session-1/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260921T080000
DTEND;TZID=America/Los_Angeles:20260922T170000
DTSTAMP:20260729T135046Z
CREATED:20260729T135046Z
LAST-MODIFIED:20260729T135046Z
UID:5190-1789977600-1790096400@wttap.com
SUMMARY:Utah LTAP: Heavy Equipment Hands On - 2 Day Course - MOTOR GRADER - Level 1 - Session 1
DESCRIPTION:Trainer – Dave Johnson \nNOTE: Students must have successfully completed the Heavy Equipment Safety Course within the last 3 years to take the Hands-On training. \nThis two-day hands-on training covers: vehicle safety\, vehicle maintenance\, daily walk-around inspections\, pre- and post-shift inspections and equipment operating techniques. \nEquipment.  This piece of equipment is the Motor Grader – Level 1 or Level 2 \nSeat time hours are required between Level 1 & 2\, or under discretion of instructor. \nSantaquin Pit  \n8:00 – 5:00 pm \nGoogle Map URL: https://goo.gl/maps/TPmReJkEe6NiMiBQA \nDirections: \n\nExit 248 Payson ( W 800 S) Turn Right\nGo to Next Cross Street/Frontage Road\nTurn Left takes you to 12000 S\nTurn Right on 12000 S from 11950 S\nHead West across the intersection of 12000 S and Mountain Road and immediately turn right before the Keigley Quarry sign.
URL:https://wttap.com/event/utah-ltap-heavy-equipment-hands-on-2-day-course-motor-grader-level-1-session-1/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260921T080000
DTEND;TZID=America/Los_Angeles:20260922T170000
DTSTAMP:20260729T135844Z
CREATED:20260729T135844Z
LAST-MODIFIED:20260729T135844Z
UID:5198-1789977600-1790096400@wttap.com
SUMMARY:Utah LTAP: Heavy Equipment Hands On - 2 Day Course - SKID STEER - Level 1 - Session 1
DESCRIPTION:Trainer – Dave Johnson \nNOTE: Students must have successfully completed the Heavy Equipment Safety Course within the last 3 years to take the Hands-On training. \nThis two-day hands-on training covers: vehicle safety\, vehicle maintenance\, daily walk-around inspections\, pre- and post-shift inspections and equipment operating techniques. \nEquipment.  This piece of equipment is the Skid Steer – Level 1 or Level 2 \nSeat time hours are required between Level 1 & 2\, or under discretion of instructor. \nSantaquin Pit  \n8:00 – 5:00 pm \nGoogle Map URL: https://goo.gl/maps/TPmReJkEe6NiMiBQA \nDirections: \n\nExit 248 Payson ( W 800 S) Turn Right\nGo to Next Cross Street/Frontage Road\nTurn Left takes you to 12000 S\nTurn Right on 12000 S from 11950 S\nHead West across the intersection of 12000 S and Mountain Road and immediately turn right before the Keigley Quarry sign.
URL:https://wttap.com/event/utah-ltap-heavy-equipment-hands-on-2-day-course-skid-steer-level-1-session-1/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260922T083000
DTEND;TZID=America/Los_Angeles:20260922T123000
DTSTAMP:20260729T131600Z
CREATED:20260729T131600Z
LAST-MODIFIED:20260729T131600Z
UID:5141-1790065800-1790080200@wttap.com
SUMMARY:Utah LTAP: MUTCD Training (Signs)
DESCRIPTION:Teachers: Randy Wahlen and Michael Hales\, Utah LTAP\, Briton Carlton\, Lehi City \nThis workshop will help the student understand the changes to the 2023 MUTCD and the new applications. Subjects include: \n\nHow the MUTCD should be used and its legal status\nSign requirements and revisions\nRegulatory Signs and their application\nWarning Signs and their application\nGuide Signs and their application and use\nTraffic Control Devices for low volume roads\nSchool Zone requirements and changes\nStudent questions on other issues by request\n\nTaylorsville USU Campus – 920 W Levoy Drive – Taylorsville  8:30 am – 12:30 pm \nRoom 156
URL:https://wttap.com/event/utah-ltap-mutcd-training-signs/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260922T083000
DTEND;TZID=America/Los_Angeles:20260922T170000
DTSTAMP:20260729T133419Z
CREATED:20260729T133419Z
LAST-MODIFIED:20260729T133419Z
UID:5163-1790065800-1790096400@wttap.com
SUMMARY:Utah LTAP: Registered SWPPP Writer/Reviewer
DESCRIPTION:Trainer – Trace Robinson \nThe purpose of the RSW & RSR program is to establish a professional standard and uniform quality of storm water SWPPPs and plan reviews in the state of Utah\, thereby aiding UPDES and local agency permit compliance. \nThe RSW program includes an additional education component* that is absent in the RSR program. \n\nAttend USWAC approved course\nPass the exam with a score of at least 70%.\nComplete 6 CGP SWPPPs (written or reviewed).\nWorking knowledge of Construction General Permit (CGP)\nWorking knowledge of Best Management Practices (BMP)\nWorking knowledge of Common Plan of Development (CPOD)\nWorking knowledge of Federal\, State\, Local Permits\nAssociates Degree or higher in Engineering or related field. (*RSW only.)\n\nCertification is good for 2 years from date of course completion. \nTaylorsville USU Distance Learning Campus – 920 W Levoy Dr. – Taylorsville \nTime – 8:30 – 5:00            \nRoom 157
URL:https://wttap.com/event/utah-ltap-registered-swppp-writer-reviewer/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260923T080000
DTEND;TZID=America/Los_Angeles:20260924T170000
DTSTAMP:20260729T133808Z
CREATED:20260729T133808Z
LAST-MODIFIED:20260729T133808Z
UID:5167-1790150400-1790269200@wttap.com
SUMMARY:Utah LTAP: Heavy Equipment Hands On - 2 Day Course - MINI EX - Level 1 - Session 2
DESCRIPTION:Trainer – Dave Johnson \nNOTE: Students must have successfully completed the Heavy Equipment Safety Course within the last 3 years to take the Hands-On training. \nThis two-day hands-on training covers: vehicle safety\, vehicle maintenance\, daily walk-around inspections\, pre- and post-shift inspections and equipment operating techniques. \nEquipment.  This piece of equipment is the Mini Ex – Level 1 or Level 2 \nSeat time hours are required between Level 1 & 2\, or under discretion of instructor. \nSantaquin Pit  \n8:00 – 5:00 pm \nGoogle Map URL: https://goo.gl/maps/TPmReJkEe6NiMiBQA \nDirections: \n\nExit 248 Payson ( W 800 S) Turn Right\nGo to Next Cross Street/Frontage Road\nTurn Left takes you to 12000 S\nTurn Right on 12000 S from 11950 S\nHead West across the intersection of 12000 S and Mountain Road and immediately turn right before the Keigley Quarry sign.
URL:https://wttap.com/event/utah-ltap-heavy-equipment-hands-on-2-day-course-mini-ex-level-1-session-2/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260923T080000
DTEND;TZID=America/Los_Angeles:20260924T170000
DTSTAMP:20260729T134216Z
CREATED:20260729T134216Z
LAST-MODIFIED:20260729T134216Z
UID:5175-1790150400-1790269200@wttap.com
SUMMARY:Utah LTAP: Heavy Equipment Hands On - 2 Day Course - BACKHOE - Level 1 - Session 2
DESCRIPTION:Trainer – Dave Johnson \nNOTE: Students must have successfully completed the Heavy Equipment Safety Course within the last 3 years to take the Hands-On training. \nThis two-day hands-on training covers: vehicle safety\, vehicle maintenance\, daily walk-around inspections\, pre- and post-shift inspections and equipment operating techniques. \nEquipment.  This piece of equipment is the Backhoe – Level 1 or Level 2\nSeat time hours are required between Level 1 & 2\, or under discretion of instructor. \nSantaquin Pit   \n8:00- 5:00pm \nGoogle Map URL: https://goo.gl/maps/TPmReJkEe6NiMiBQA \nDirections: \n\nExit 248 Payson ( W 800 S) Turn Right\nGo to Next Cross Street/Frontage Road\nTurn Left takes you to 12000 S\nTurn Right on 12000 S from 11950 S\nHead West across the intersection of 12000 S and Mountain Road and immediately turn right before the Keigley Quarry sign.
URL:https://wttap.com/event/utah-ltap-heavy-equipment-hands-on-2-day-course-backhoe-level-1-session-2/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260923T080000
DTEND;TZID=America/Los_Angeles:20260924T170000
DTSTAMP:20260729T134615Z
CREATED:20260729T134615Z
LAST-MODIFIED:20260729T134615Z
UID:5183-1790150400-1790269200@wttap.com
SUMMARY:Utah LTAP: Heavy Equipment Hands On - 2 Day Course - FRONT END LOADER - Level 1 - Session 2
DESCRIPTION:Trainer – Dave Johnson \nNOTE: Students must have successfully completed the Heavy Equipment Safety Course within the last 3 years to take the Hands-On training. \nThis two-day hands-on training covers: vehicle safety\, vehicle maintenance\, daily walk-around inspections\, pre- and post-shift inspections and equipment operating techniques. \nEquipment.  This piece of equipment is the Front End Loader – Level 1 or Level 2 \nSeat time hours are required between Level 1 & 2\, or under discretion of instructor. \nSantaquin Pit  \n8:00 – 5:00 pm \nGoogle Map URL: https://goo.gl/maps/TPmReJkEe6NiMiBQA \nDirections: \n\nExit 248 Payson ( W 800 S) Turn Right\nGo to Next Cross Street/Frontage Road\nTurn Left takes you to 12000 S\nTurn Right on 12000 S from 11950 S\nHead West across the intersection of 12000 S and Mountain Road and immediately turn right before the Keigley Quarry sign.
URL:https://wttap.com/event/utah-ltap-heavy-equipment-hands-on-2-day-course-front-end-loader-level-1-session-2/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260923T080000
DTEND;TZID=America/Los_Angeles:20260924T170000
DTSTAMP:20260729T135151Z
CREATED:20260729T135151Z
LAST-MODIFIED:20260729T135151Z
UID:5192-1790150400-1790269200@wttap.com
SUMMARY:Utah LTAP: Heavy Equipment Hands On - 2 Day Course - MOTOR GRADER - Level 1 - Session 2
DESCRIPTION:Trainer – Dave Johnson \nNOTE: Students must have successfully completed the Heavy Equipment Safety Course within the last 3 years to take the Hands-On training. \nThis two-day hands-on training covers: vehicle safety\, vehicle maintenance\, daily walk-around inspections\, pre- and post-shift inspections and equipment operating techniques. \nEquipment.  This piece of equipment is the Motor Grader – Level 1 or Level 2 \nSeat time hours are required between Level 1 & 2\, or under discretion of instructor. \nSantaquin Pit  \n8:00 – 5:00 pm \nGoogle Map URL: https://goo.gl/maps/TPmReJkEe6NiMiBQA \nDirections: \n\nExit 248 Payson ( W 800 S) Turn Right\nGo to Next Cross Street/Frontage Road\nTurn Left takes you to 12000 S\nTurn Right on 12000 S from 11950 S\nHead West across the intersection of 12000 S and Mountain Road and immediately turn right before the Keigley Quarry sign.
URL:https://wttap.com/event/utah-ltap-heavy-equipment-hands-on-2-day-course-motor-grader-level-1-session-2/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260923T080000
DTEND;TZID=America/Los_Angeles:20260924T170000
DTSTAMP:20260729T135953Z
CREATED:20260729T135953Z
LAST-MODIFIED:20260729T135953Z
UID:5200-1790150400-1790269200@wttap.com
SUMMARY:Utah LTAP: Heavy Equipment Hands On - 2 Day Course - SKID STEER - Level 1 - Session 2
DESCRIPTION:Trainer – Dave Johnson \nNOTE: Students must have successfully completed the Heavy Equipment Safety Course within the last 3 years to take the Hands-On training. \nThis two-day hands-on training covers: vehicle safety\, vehicle maintenance\, daily walk-around inspections\, pre- and post-shift inspections and equipment operating techniques. \nEquipment.  This piece of equipment is the Skid Steer – Level 1 or Level 2 \nSeat time hours are required between Level 1 & 2\, or under discretion of instructor. \nSantaquin Pit  \n8:00 – 5:00 pm \nGoogle Map URL: https://goo.gl/maps/TPmReJkEe6NiMiBQA \nDirections: \n\nExit 248 Payson ( W 800 S) Turn Right\nGo to Next Cross Street/Frontage Road\nTurn Left takes you to 12000 S\nTurn Right on 12000 S from 11950 S\nHead West across the intersection of 12000 S and Mountain Road and immediately turn right before the Keigley Quarry sign.
URL:https://wttap.com/event/utah-ltap-heavy-equipment-hands-on-2-day-course-skid-steer-level-1-session-2/
END:VEVENT
END:VCALENDAR